HEADLAMP, REMOVING AND INSTALLING, HID HEADLAMP, From MY 2013: Removing

Fig 1: Headlamp Housing Remove/Install Components

Courtesy of AUDI OF AMERICA, LLC

-- Turn the light switch to position "0".

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Do not operate the headlamp flasher.

-- Remove The Front Bumper Cover. Refer To FRONT - BUMPER COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -2-.

-- Remove the bolts -1 and 4-.

-- Remove the bolt -3- and remove the adjusting mechanism from the headlamp housing.

-- Loosen the screws -arrows- a few turns from the headlamp housing.

-- Remove the headlamp -5- toward the front from the body.

• The ventilation hose may need to be removed from the bracket to do this depending on the date of manufacture.