HEADLAMP, REMOVING AND INSTALLING, HALOGEN HEADLAMPS, Through MY 2012: Removing

Fig 1: Identifying Headlamp Housing Components

Courtesy of AUDI OF AMERICA, LLC

-- Turn the light switch to position "0".

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Do not operate the headlamp flasher.

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING / OVERVIEW - LOCK CARRIER .

-- Disconnect the connector -4-.

-- Remove the bolts -2- and -5-.

-- Loosen the lower bolt -3- on the headlamp housing using a long wrench.

-- Remove headlamp -1- toward the front and out of the body.