Headlamp Adjustment

• The Horizontal Light-Dark Border -1- Must Touch The Dividing Line -4- On The Adjusting Unit Test Surface.
  Fig 1: Headlamp Adjustment Graph

  Courtesy of AUDI OF AMERICA, LLC
• The Point -2- Must Be Positioned Exactly In The Center - Center Mark For The Line -3-.
• After Making This Adjustment, Turn The Side Adjustment Bolt 3.5 Turns To Adjust The Side Adjustment Point -2- Toward The Left As Shown In The Illustration.
  Fig 2: Headlamp Adjustment Graph

  Courtesy of AUDI OF AMERICA, LLC
• The Horizontal Light-Dark Border -1- Remains Unchanged.

-- To Adjust The Height Of The Headlamp, Set The Light-Dark Border Just Under The Dividing Line With The Adjustment Screw -1-.

Fig 3: Identifying Adjustment Screw -1- & Adjusting Screw -2-

Courtesy of AUDI OF AMERICA, LLC

-- Then Adjust The Light-Dark Border On The Dividing Line Starting From The Bottom.

• The Side Adjustment Bolt -2- Must Be Secured With The Plugs After The Adjustment Is Made. Plugs.