Fog Lamp, Adjusting: Notes

Test And Adjusting Conditions

• Tire pressure is OK.
• The headlamp glass must be clean and dry.
• The headlamp glass must not be damaged.
• Headlamp reflectors and bulbs are OK.
• Roll the vehicle several meters or move it back and forth several times to set the springs.
• The parking brake must not be engaged so that the vehicle is not under stress.
• The vehicle and headlamp adjusting unit must be on a level surface.
• The headlamp adjusting unit must be aligned to the vehicle. Refer to the Headlamp Adjusting Unit Operating Instructions.
• The angle dimension is set on the headlamp adjusting unit. Refer to the Headlamp Adjusting Unit Operating Instructions.
• The vehicle must be under load.

Vehicle Load On Driver Seat In Otherwise Unloaded Vehicle (Curb Weight).

• One person or 75 kg (165 lbs).

Preliminary Work 

-- The vehicle must be on a level surface.

-- Turn the light switch to "low beam" - not to "Auto".

-- Pull the headlamp switch to "fog lamp" position.

-- During the program, it will be asked to perform a headlamp adjustment.