Vanity Mirror Illumination Bulb -L31-, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Prying Out Make-Up Mirror Light Using A Flat Screwdriver At Recess

Courtesy of AUDI OF AMERICA, LLC

-- Using a flat head screwdriver, carefully pry the make-up mirror lamp out at the opening -arrow-.

-- Disconnect the connector.

-- To replace the bulb, remove the cover -arrow-.

Fig 2: Bulb Holder And Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bulb from the socket on the rear side of the vanity mirror lamp.