Rotary Light Switch -Ex1-, Removing And Installing: Removing

Fig 1: Identifying Instrument Panel Cover

Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Turn the headlamp switch to "0".

-- Pry off the instrument panel side cover -1- using the Trim Removal Wedge:3409  -arrow- and remove it.

-- Open the clip -arrow A- and move fuse panel C -2- in direction of -arrow B- on the instrument panel central tube -1-.

Fig 2: Identifying Fuse Panel C

Courtesy of AUDI OF AMERICA, LLC

-- Reach through the side opening in the instrument panel and push the Light Switch -E1- -item 1- toward the rear and out of the driver side instrument panel cover -arrow-.

Fig 3: Identifying Light Switch And Connector

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector.