Headlamp Range Control Adjuster -E102-, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Headlamp Light Switch Trim, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Remove the driver side instrument panel cover. Refer to STORAGE COMPARTMENTS AND COVERS .

-- Remove the bolts -arrows- and the light switch trim -1-.

-- Disconnect the connector for the Light Switch -E1-.

NOTE:

The Illustration Shows The Light Switch -E1- Removed.

-- Press the release button and disconnect the connector -1- from the Headlamp Range Control Adjuster -E102-.

Fig 2: Disconnect The Electrical Connector -1- From The Headlamp Range Control Adjuster -E102- By Pressing The Release Button

Courtesy of AUDI OF AMERICA, LLC

-- Carefully release the retaining hooks -arrows- using a small screwdriver.

-- Remove the Headlamp Range Control Adjuster -E102- -item 2- from the light switch trim.