Emergency Flasher Button -E229-, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Pry MMI Screen Cover -1- Out

Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Pry off the cover -1- for the MMI screen on the corners using the Trim Removal Wedge:3409 -arrow-.

-- Disconnect the electrical connector and remove the installation frame.

-- Remove the Emergency Flasher Button -E229- -item 1- from the frame -2- -arrow-.

Fig 2: Identifying Passenger Airbag Indicator Lamp, Removal

Courtesy of AUDI OF AMERICA, LLC