Socket Illumination Bulb -L42- /12 V Socket -U5-, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
Install In Reverse Order Of Removal. Note The Following:
-- Remove the support -1- on the Cigarette Lighter Release Tool:T40148 .
-- Slide the piston down and hold it in place.
-- Turn the thumbwheel -4- on the Cigarette Lighter Release Tool:T40148 counter-clockwise -arrow-. While doing so, the release tabs -2- are loosened on the 12 V Socket -U5- -item 3- and the Cigarette Lighter Release Tool:T40148 can be removed.
-- Install the center console. Refer to CENTER CONSOLE .