12 V Socket 3 -U19-, Replacing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Open the cover for the right luggage compartment side trim panel.
-- Disconnect the connector.
-- The release tabs -2- on the Cigarette Lighter Release Tool :T40148 must engage into the openings of the 12 V Socket 3 -U19- -item 3- -arrow-. To do so, the threaded rod -1- must be slid downward until it stops.
-- Open the mount cover -2- and hold it in that position.
-- Slide the Cigarette Lighter Release Tool:T40148 all the way into the 12 V socket -3-.
-- Turn the thumbwheel -1- on the Cigarette Lighter Release Tool:T40148 clockwise all the way to the end stop.
- The piston -2- is pulled upward and the release tabs -1- on the Cigarette Lighter Release Tool:T40148 spread -arrows-.
-- Remove the 12 V socket from the mount.