12 V Socket 2 -U18-, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Support, Thumbwheel, Release Tabs, Release Tool T40148 & Cigarette Lighter

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note The Following:

-- Remove the support -1- on the Cigarette Lighter Release Tool:T40148 .

-- Slide the piston down and hold it in place.

-- Rotate the thumbwheel -4- on the Cigarette Lighter Release Tool:T40148 counterclockwise -arrow-. This loosens the release tabs -2- on the 12 V Socket -3- so the Cigarette Lighter Release Tool:T40148 can be removed.