Overview - Interior Monitoring
WARNING: This page is about a different variant/trim than selected.
- The Interior Monitoring Transceiver Module 1 -G303- and Inclination Sensor/Anti-Theft System Control Module -J529- were combined in one component, the Anti-Theft Alarm System Sensor -G578-.
- Therefore, the Comfort System Central Control Module -J393- still only has two "LIN" participants with the "anti-theft alarm system" optional equipment.
- Alarm Horn -H12-
- Removing and installing. Refer to Alarm Horn -H12-, REMOVING AND INSTALLING .
- Nut
- 5 Nm
- Nut
- 7 Nm
- Alarm Horn -H12- bracket
- Comfort System Central Control Module -J393-
- Removing and installing. Refer to CENTRAL LOCKING
- Control Module Bracket
- Antenna Amplifier
- Removing and installing. Refer to ANTENNA SYSTEMS
.
Coupe
- Antenna Amplifier 3 -R112- with Central Locking and Anti-Theft Alarm System Antenna -R47-
Sportback
- Antenna Amplifier 2 -R111- with Central Locking and Anti-Theft Alarm System Antenna -R47-
- Removing and installing. Refer to ANTENNA SYSTEMS
.
- Interior Monitoring Switch -E183- /Interior Monitoring Deactivation Switch -E217-
Coupe
- Removing and installing. Refer to Interior Monitoring Switch -E183- /Alarm System Deactivation Switch -E217-, REMOVING AND INSTALLING, COUPE .
Sportback
- Removing and installing. Refer to Interior Monitoring Switch -E183- /Alarm System Deactivation Switch -E217-, REMOVING AND INSTALLING, SPORTBACK .
- Removing and installing. Refer to Interior Monitoring Switch -E183- /Alarm System Deactivation Switch -E217-, REMOVING AND INSTALLING, COUPE .
- Anti-Theft Alarm System Sensor -G578-
- Removing and installing. Refer to Anti-Theft Alarm System Sensor -G578-, REMOVING AND INSTALLING .
- Front Interior Lamp/Reading Lamp
- Front Interior Monitoring Individual Sensor
- Can only be replaced together with the Anti-Theft Alarm System Sensor -G578-