Anti-Theft Alarm System Sensor -G578-, Removing And Installing: Removing

Fig 1: Identifying Anti-Theft Alarm System Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front interior lamp/reading lamp. Refer to FRONT INTERIOR LAMP/READING LAMP, REMOVING AND INSTALLING .

-- Release the clips -B arrows- and remove the anti-theft alarm system individual sensor -item 1- from the interior lamp/reading lamp.

-- Free up the electrical wire -2-.

-- Release the clips -A arrows- and remove the Anti-Theft Alarm System Sensor -G578- -3- from the interior lamp/reading lamp.

-- Press the clips to the side -A arrows- and remove the Anti-Theft Alarm System Sensor -G578- -item 1- from the mount -2-.

Fig 2: Identifying Retaining Clips, Removal

Courtesy of AUDI OF AMERICA, LLC

-- Release the clips -B arrows- and press the anti-theft alarm system individual sensors -3- out of the mount.