Seat Rail Cover, Removing And Installing, Standard Seat, Sport Seat, Super Sport Seat: Removing
WARNING: This page is about a different variant/trim than selected.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Remove The Bolts From The Seat Rail:
- Standard seat and Sport seat (manual). Refer to FRONT SEAT, REMOVING AND INSTALLING, MANUAL .
- Standard seat, Sport seat (power) and Comfort seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, POWER .
- For the super sport seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, POWER .
-- Unclip The Retaining Tabs -3, 4 And 5- On The Cover -2- From The Seat Rail.
-- Remove the cover -1- forward parallel to the seat rail.