Disassembling The Lower Seat Frame
WARNING: This page is about a different variant/trim than selected.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Move the front seat as far up as possible to keep the torsion bar tension as low as possible.
-- Remove The Front Seat:
- Standard seat, Sport seat (power) and Comfort seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, POWER .
- For the super sport seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, POWER .
-- Remove front backrest. Refer to FRONT BACKREST, REMOVING AND INSTALLING, POWER STANDARD SEAT .
-- Remove the seat pan padding.
- Power standard seat and Comfort seat. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, SEAT PAN WITHOUT SEAT DEPTH ADJUSTER .
- Power sport seat and super sport seat. Refer to SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, SEAT PAN WITH SEAT DEPTH ADJUSTER .