Seat Height Adjustment Handle, Removing And Installing, Manual Standard Seat/Sport Seat: Removing
WARNING: This page is about a different variant/trim than selected.
NOTE:
Remove The Seat Height Adjustment Handle -1- As Described. Do Not Drive It Off The Lever -2-.
If The Tab -Arrow- Is Damaged When Removing The Seat Height Adjustment Handle, The Handle Cannot Be Reinstalled. It Must Be Replaced.
-- Pull the seat height adjustment handle -1- as far up as possible and hold it in that position.
-- Carefully pull the seat height adjustment handle slightly away from the front seat.
-- Guide the T-Handle Hook:3438 between the seat height adjustment handle and the trim -2-.
-- Release the tab -3- using the T-Handle Hook:3438 and at the same time, remove the seat height adjustment handle in the direction of the -arrow- from the lever.