Seat Depth ADJUSTOR Trim, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Remove The Front Seat:
- For the manual sport seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, MANUAL .
- Power sport seat and super sport seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, POWER .
-- Attach the front seat to the Engine/Transmission Holder - Seat Repair Fixture:VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Equipment level with storage compartment: remove the storage compartment. Refer to STORAGE COMPARTMENT, REMOVING AND INSTALLING .
-- Move the seat depth adjuster all the way forward.
-- Unclip the tabs -arrows- on the trim -1- using a Trim Removal Wedge:3409 .
-- Remove the trim from the seat depth adjuster.