Release Cable Mount Lever And Seat Forward/Back Adjustment Spring, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

NOTE:

The Work Can Be Performed With The Seat Installed.

-- Move the seat as far as possible up and back.

-- Disengage the control cable bracket of release cable -1- at seat forward/back adjuster -2-.

Fig 1: Disengage Release Cable Bracket At Seat Forward/Back Adjuster

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the end of the release cable -arrow- at release cable retainer lever -3- of the seat forward/back adjuster.

-- Turn the release cable retainer lever forward and remove it >>key hole principle<<.

-- Remove the spring if necessary.