Overview - Seat Pan
WARNING: This page is about a different variant/trim than selected.
- Seat Depth Adjuster
- Only for Sport seats
- Removing and installing. Refer to SEAT DEPTH ADJUSTER, REMOVING AND INSTALLING .
- Upper Seat Frame
- Removing and installing. Refer to SEAT PAN, DISASSEMBLING AND ASSEMBLING .
- Install all electrical and electronic components and wires in the new upper frame.
- Washer
- Bolt
- 22 Nm
- Always replace
- Self-locking
- Threaded holes for bolts must be cleaned, for example, with a thread tap
- Quantity: 4
- Lower Seat Frame
- Driver side: with Driver Seat Forward/Back Adjustment Motor -V28-
- Front passenger side: with Front Passenger Seat Forward/Back Adjustment Motor -V31-
- Cannot be disassembled
- Removing and installing. Refer to SEAT PAN, DISASSEMBLING AND ASSEMBLING .
- For replacing, install the Removing and Installing and seat belt latch in the new lower frame
- Bushing
- Inserted in all bearing locations
- Cannot be replaced
- The assembly component must be replaced if the bushing is damaged