Overview - Power Headrests
WARNING: This page is about a different variant/trim than selected.
NOTE:
The Illustration Does Not Show The Backrest Cover And Padding.
- Front Backrest
- Headrest Guide
- Without release button
- Removing and installing. Refer to HEADREST GUIDE, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .
- Always installed on right side of backrest
- Line
- With connector
- Connected firmly to the headrest
- Headrest
- Driver side: with Driver Headrest Adjustment Motor -V103- / Driver Headrest Height Adjustment Sensor -G217-
- Front passenger side: with Front Passenger Headrest Adjustment Motor -V104- / Front Passenger Headrest Height Adjustment Sensor -G282-
- Removing and installing. Refer to HEADREST, REMOVING AND INSTALLING, POWER HEADREST .
- In the case of the headrest, the cover and upholstery can only be replaced with the entire base plate (including the adjuster) Parts Information.
- It is not possible to disassemble the base plate or replace the electrical and electronic components installed inside.
- Headrest Guide
- With release button
- Removing and installing. Refer to HEADREST GUIDE, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .
- Always installed on left side of backrest