Overview - Front Backrest, Power Standard Seat

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Front Backrest

Courtesy of AUDI OF AMERICA, LLC

Seat Pan
Bolts
- 33 Nm
- Always replace if removed
- Threaded holes for bolts must be cleaned, for example, with a thread tap
- Self-locking
Backrest
- Removing and installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING, POWER STANDARD SEAT .
Headrest
- Power
- Removing and installing. Refer to HEADREST, REMOVING AND INSTALLING, POWER HEADREST .
Entry Assistance Trim
- Removing and installing. Refer to ENTRY ASSISTANCE TRIM, REMOVING AND INSTALLING, POWER STANDARD SEAT .
Handle
- With bracket (entry assistance)
- Removing and installing. Refer to ENTRY ASSISTANCE HANDLE WITH BRACKET, REMOVING AND INSTALLING .
Button
- With entry assist
- Overview. Refer to OVERVIEW - ENTRY ASSISTANCE BUTTON .
Wiring Harness
- From the side airbag to the connector station
- Depending on optional equipment, there may be more wiring harnesses, such as for seat heating, lumbar support