Overview - Front Backrest, Bucket Seat
WARNING: This page is about a different variant/trim than selected.
- Bolts
- 24 Nm
- Install with locking compound. For the correct locking compound.
- Bolt
- 4 Nm
- Handle
- For seat forward/back adjustment
- Removing and installing. Refer to SEAT FORWARD/BACK ADJUSTMENT RELEASE CABLE, REMOVING AND INSTALLING, BUCKET SEAT .
- Bolt
- 24 Nm
- Install with locking compound. For the correct locking compound.
- Seat Pan
- Removing and installing. Refer to SEAT PAN, REMOVING AND INSTALLING .
- Bolt
- 20 Nm
- Install with locking compound. For the correct locking compound.
- Front Backrest
- Removing and installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING, BUCKET SEAT .
- Bolts
- 20 Nm
- Install with locking compound. For the correct locking compound.
- Pneumatic Hose
- From the module carrier with air cushions for lumbar support
- Wiring Harness
- Bolt
- 24 Nm
- Install with locking compound. For the correct locking compound.
- Seat Frame