Overview - Backrest Release, Power Standard Seat

WARNING: This page is about a different variant/trim than selected.

NOTE:

The Illustration Does Not Show The Seat Frame And The Four-Way Lumbar Support.

Fig 1: Exploded View Of Backrest Release (Power Standard Seat)

Courtesy of AUDI OF AMERICA, LLC

Backrest Frame
Bolts
- For the backrest release
- Both sides
- Component of the backrest hinge
Release Cable
- For the backrest release
- One piece
- Removing and installing. Refer to BACKREST RELEASE CABLE, REMOVING AND INSTALLING, STANDARD SEAT/SPORT SEAT/SUPER SPORT SEAT .
- Adjusting. Refer to BACKREST RELEASE CABLE, ADJUSTING, STANDARD SEAT, SPORT SEAT, SUPER SPORT SEAT .
Bracket
- For the backrest release cable
- Component of the release cable
- Riveted to backrest frame
- Quantity: 2
Mount
- For the backrest release cable
- Component of the release cable
- Clipped to the backrest frame
Connecting Cable
- For the backrest release
- Between the handle and bracket
- Engaged in the handle and bracket
- Removing and installing. Refer to ENTRY ASSISTANCE CONNECTING CABLE, REMOVING AND INSTALLING .
Handle
- With backrest release bracket
- Removing and installing. Refer to ENTRY ASSISTANCE HANDLE WITH BRACKET, REMOVING AND INSTALLING .
Bolts
- 3.5 Nm
- Quantity: 2
Trim
- Removing and installing. Refer to ENTRY ASSISTANCE TRIM, REMOVING AND INSTALLING, MANUAL STANDARD SEAT .
Button
- With entry assist
- Overview. Refer to OVERVIEW - ENTRY ASSISTANCE BUTTON .
Bolt
- 3.5 Nm
Bracket
- For the backrest release
- Riveted to backrest frame
- Removing and installing. Refer to BACKREST RELEASE BRACKET, REMOVING AND INSTALLING .
Support Plate
- Riveted to backrest frame
- There are different versions.
- Removing and installing. Refer to ENTRY ASSISTANCE SUPPORT PLATE, REMOVING AND INSTALLING .
Rivet
- Quantity: 2