Headrest, Removing And Installing, Headrest With Sliding Locking Mechanism: Removing

WARNING: This page is about a different variant/trim than selected.

-- Find release button pressure point -3-. It is located under the backrest cover.

Fig 1: Finding Release Button Pressure Point

Courtesy of AUDI OF AMERICA, LLC

-- Press the release button forward in the direction of the -arrow-.

-- Hold the release button down in this position.

-- Remove the headrest -2- from the guides -1 and 4-.

NOTE:

If The Release Button Cannot Be Released As Described, Remove The Backrest Cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, TWO PIECE . Reach under the backrest cover and find the pressure point on the release button.