LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (SEAT FRAMES (1 Of 2) (COUPE)) >> 72 Seat Frames >> Front Seats >> Front Seat, Removing And Installing >> Front Seat, Removing And Installing, Power >> Removing

Front Seat, Removing And Installing, Power: Removing

WARNING: This page is about a different variant/trim than selected.
WARNING:
  • Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.

-- Move the seat into its service position. Refer to FRONT SEAT, MOVING INTO SERVICE POSITION .

-- Remove front bolts -1- (quantity: 2).

Fig 1: Identifying Front Bolt To Console
GWWA72-10706Courtesy of AUDI OF AMERICA, LLC

-- Operate seat forward/back adjuster and move the seat -2- as far forward as possible.

-- Remove rear bolts -1- (quantity: 2).

3  - Rear Console

4  - Front Console

-- Turn on the ignition.

-- Disconnect the battery ground cable with the ignition turned on. Refer to BATTERY, DISCONNECTING AND CONNECTING .

WARNING:

Before Handling Pyrotechnic Components (For Example, Disconnecting The Connector), The Person Handling It Must "Discharge Static Electricity". This Can Be Done By Touching The Door Striker, For Example.

-- Disconnect the harness connectors. Refer to CONNECTORS, DISCONNECTING AND CONNECTING  on the connector station in the floor.

-- Connect the Airbag Adapter. Refer to AIRBAG ADAPTER, CONNECTING AND DISCONNECTING .

-- Lift the front seat with a second technician and remove it from the vehicle.

scientia non olet · About LEMON Manuals