LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (SEAT FRAMES (1 Of 2) (COUPE)) >> 72 Seat Frames >> Front Seats >> Front Seat, Removing And Installing >> Front Seat, Removing And Installing, Manual >> Removing

Front Seat, Removing And Installing, Manual: Removing

WARNING: This page is about a different variant/trim than selected.
WARNING:

Follow All Safety Precautions When Working With Pyrotechnic Components. Refer to SAFETY PRECAUTIONS .

-- Move the seat into its service position. Refer to FRONT SEAT, MOVING INTO SERVICE POSITION .

-- Turn on the ignition.

-- Disconnect The Battery Ground Cable With The Ignition Turned On. Refer To BATTERY, DISCONNECTING AND CONNECTING .

WARNING:

Before Handling Pyrotechnic Components (For Example, Disconnecting The Connector), The Person Handling It Must "Discharge Static Electricity". This Can Be Done By Touching The Door Striker, For Example.

-- Disconnect the harness connectors. Refer to CONNECTORS, DISCONNECTING AND CONNECTING  on the connector station in the floor.

-- Connect the Airbag Adapter. Refer to AIRBAG ADAPTER, CONNECTING AND DISCONNECTING .

-- Remove front bolts -1- (quantity: 2).

Fig 1: Pressing Seat Forward/Back Adjustment Handle
GWWA72-10705Courtesy of AUDI OF AMERICA, LLC

3  - Rear Console

4  - Front Console

-- Press the seat forward/back adjustment handle and move the seat -2- as far forward as possible.

-- Remove rear bolts -1- (quantity: 2).

-- With help from a second technician, lift the seat -2- out of the vehicle.

scientia non olet · About LEMON Manuals