Front Backrest, Removing And Installing, Bucket Seat: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove the seat pan. Refer to SEAT PAN, REMOVING AND INSTALLING .

-- Remove the seat adjustment control module. Refer to SEAT ADJUSTMENT CONTROL MODULE, REMOVING AND INSTALLING .

-- Remove the bolt -1-.

Fig 1: Identifying Front Backrest

Courtesy of AUDI OF AMERICA, LLC

WARNING:

Danger Of Eye Injury.

-- Drill out the blind rivet -2- with a 4 mm drill and remove retaining bracket -3-.

-- Remove the left and right bolts -arrows-.

Fig 2: Removing Left And Right Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the backrest -3- and cut the cable ties -2- for the electrical wiring harness.

-- Remove the backrest with the electrical wiring harness.