Backrest Cover, Removing And Installing, Two Piece: Removing
Wear Protective Gloves To Avoid Injury From Burrs That May Be On The Backrest Cover.
-- Disengage the lower side hooks -3- (quantity: 2) on the backrest cover -2-.
1 - Backrest frame trim
-- Press the backrest cover -1- toward the center of the seat in the direction of the -arrow A-.
-- Remove The Backrest Cover Back In The Direction Of The -Arrow B-.
-- Do the same on the opposite side.
-- Disengage the sides of the backrest cover -2- -arrows A, B, E- and -arrow F-.
-- Reach behind the backrest cover -1- and remove the right side from the backrest -2-.
-- Do the same to the opposite side of the backrest cover -1-.
-- Loosen the side retaining hooks -3 and 5-. Refer to Figure.
-- Remove the backrest cover -1- further and bend it until the upper hooks -2-. Refer to Figure disengage from the backrest frame.
The Illustration Does Not Show The Upper Hooks.
-- Tip the backrest cover -1- back slightly.
-- Press the backrest cover -1- down in the direction of the -arrow A-.
-- Lift the backrest cover in the direction of the -arrow B- and remove it from the backrest frame.