LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (SEAT FRAMES (1 Of 2) (COUPE)) >> 72 Seat Frames >> Front Seats >> Backrest Cover, Removing And Installing >> Backrest Cover, Removing And Installing, Bucket Seat >> Removing

Backrest Cover, Removing And Installing, Bucket Seat: Removing

WARNING: This page is about a different variant/trim than selected.

-- Apply adhesive tape -2- to the backrest shell all around trim -1-.

Fig 1: Affixing Backrest Panel All Around Trim Using Adhesive Tape
GWWA72-10149Courtesy of AUDI OF AMERICA, LLC

-- Using the Pry Lever:80-200  , pry off the upper backrest cover on the inner side, starting from the backrest shell.

-- Disengage the clip at the front edge of the backrest cover extremely carefully.

scientia non olet · About LEMON Manuals