Seat Bench/Single Seat, Removing And Installing: Removing

-- Tilt the front seat backrests as far forward as possible.

-- Move the front seats as far forward as possible.

-- Remove the LATCH child seat anchor cover (quantity: 4) -1- from the anchors -2-.

Fig 1: Identifying Rear Latch Bracket Cover Caps

Courtesy of AUDI OF AMERICA, LLC

-- Reach under the seat frame with both hands on one side of the seat in direction of -A arrows-.

Fig 2: Insert Bench Seat And Press Wire Frame "Firmly" Into Grommets

Courtesy of AUDI OF AMERICA, LLC

-- Pull bench seat -1- up forcefully with both hands in direction of -A arrows- so that wire hooks -2- disengage from mounting grommet -3-.

-- Repeat the procedure on the other side in direction of -B arrows-.

-- Vehicles with seat heating: disconnect the seat heating connector

-- Remove the bench seat from the vehicle.