LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (SEAT FRAMES (2 Of 2) (COUPE)) >> 72 Seat Frames >> Rear Seats >> Release Cable, Removing And Installing From Connector Station Retainer >> Notes

Release Cable, Removing And Installing From Connector Station Retainer: Notes

WARNING: This page is about a different variant/trim than selected.
NOTE:

The Procedure For Removing And Installing The Release Cable Is Described On The Basis Of The Left Lock To The Connector Station. Removal And Installation Is Similar On The Right Lock.

The release cable at the lock to the connector station can only be replaced with the cover and upholstery removed.

scientia non olet · About LEMON Manuals