Lock Cylinder, Removing And Installing, Pass-Through Door Handle: Removing

WARNING: This page is about a different variant/trim than selected.

-- Fold Center Armrest Up.

CAUTION:

Only Remove And Install The Lock Cylinder With The Key Inserted Correctly. If That Is Not Done, The Tumblers And Compression Springs Can Fall Out And The Lock Cylinder Will Be Ruined.

-- Insert The Key -3- Into The Lock Cylinder -2- Correctly.

Fig 1: Identifying Pass-Through Cover Lock Cylinder

Courtesy of AUDI OF AMERICA, LLC

-- Turn the key -3- 90° counterclockwise.

-- Push the pass-through handle -1- up as far as the stop.

-- Release the tabs -arrows- and press the lock cylinder -2- with the key -3- out of the handle.