Storage Compartment, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer To SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Remove The Front Seat:
- Standard seat and Sport seat (manual). Refer To FRONT SEAT, REMOVING AND INSTALLING, MANUAL .
- Standard seat, Sport seat (power) and Comfort seat. Refer To FRONT SEAT, REMOVING AND INSTALLING, POWER .
- For the super sport seat. Refer To FRONT SEAT, REMOVING AND INSTALLING, POWER .
-- Attach the front seat to the Engine/Transmission Holder - Seat Repair Fixture:VAS6136 . Refer To FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Open the storage compartment -1- and remove the bolts -2-.
-- Release the tab -arrow- on the storage compartment -2- and remove the storage compartment downward from the sill-side trim -1-.
-- Push the storage compartment -1- in the direction of the -arrow- and disengage the retainer -lower arrow- from the upper seat frame -2-.
-- Remove the storage compartment from the seat pan upper frame.