Module Carrier With Air Cushions For Lumbar Support, Removing And Installing: Removing

-- Remove the backrest padding. Refer To BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, BUCKET SEAT .

-- Cut through the cable tie -3-.

Fig 1: Identifying Module Carrier With Air Cushions For Lumbar Support

Courtesy of AUDI OF AMERICA, LLC

-- Expose the wiring harness and pneumatic hose at retaining clip -4-.

-- Carefully detach the adhesive of module carrier -2- from the backrest.

-- Tilt the upper edge of the module carrier forward -arrow- and guide out at backrest adjustment shaft -1-.

-- Remove the module carrier.