C-Pillar Trim Panel, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
WARNING:
Follow All Safety Precautions When Working With Pyrotechnic Components. Refer to SAFETY PRECAUTIONS .
-- Fold the rear seat backrest forward.
-- Versions with sun shade: Unclip the sun shade guide trim -1- using a screwdriver and remove it.
-- Pry the "Airbag" symbol -2- approximately 5 mm out of the expanding clip using a screwdriver.
-- Unclip the C-pillar trim panel -3- using the Trim Removal Wedge:3409 in direction of -arrow A-.
-- Pull the C-pillar trim out of the rear shelf and the side trim in direction of -B arrows- and remove it.