B-Pillar Trim Panel, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
WARNING:
Follow All Safety Precautions When Working With Pyrotechnic Components. Refer to SAFETY PRECAUTIONS .
-- Remove the B-pillar trim. Refer to B-PILLAR TRIM, REMOVING AND INSTALLING .
-- Remove the side trim panel. Refer to SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Hold the belt webbing -2- to the side and remove the bolts -3-.
-- Remove B-pillar trim -1- from the mount on the headliner in direction of -arrow-.
-- Remove the front belt anchor. Refer to FRONT BELT END FITTING, REMOVING AND INSTALLING .
-- Thread the belt webbing with the locking tongue through the belt extraction panel and remove the B-pillar trim.