B-Pillar Trim Panel, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Do not pinch the head curtain airbag when installing the B-pillar trim.
Install in reverse order of removal. Note The Following:
-- Thread the belt webbing with seat belt latch through the belt extraction panel.
-- Install the front belt anchor. Refer to FRONT BELT END FITTING, REMOVING AND INSTALLING .
-- First insert the top of the B-pillar trim in the mount on the headliner and then tighten the bolts.