A-Pillar Trim Panel, Removing And Installing, A-Pillar Lower Trim Panel: Removing
WARNING: This page is about a different variant/trim than selected.
-- Remove the instrument panel side cover. Refer to INSTRUMENT PANEL SIDE COVER, REMOVING AND INSTALLING .
-- Remove the instrument panel cover on the driver side. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING, VEHICLE WITHOUT KNEE AIRBAGS .
-- Remove the cable release lever. Refer to HOOD RELEASE LEVER, REMOVING AND INSTALLING .
-- Remove lower A-pillar trim bolt -1-.
-- Unclip lower A-pillar trim panel -2- from the sill panel in direction of -arrow- using the Trim Removal Wedge:3409 .
-- Pull the lower A-pillar trim back and remove it from the upper A-pillar trim.