Overview - Instrument Panel

WARNING: This page is about a different variant/trim than selected.

Fig 1: Exploded View Of Instrument Panel Assembly

Courtesy of AUDI OF AMERICA, LLC

Bolt
- 1.5 Nm
- Quantity: 3
Light Switch -E1-
- Removing and Installing. Refer to INSTRUMENT PANEL AND SWITCH ILLUMINATION DIMMER SWITCH -E20-, REMOVING AND INSTALLING .
Headlamp Range Control Adjuster -E102-
- Removing and Installing. Refer to HEADLAMP RANGE CONTROL ADJUSTER -E102-, REMOVING AND INSTALLING .
Bolt
- 3 Nm
- Quantity: 6
Frame
- For instrument cluster
- Removing and installing. Refer to INSTRUMENT CLUSTER FRAME, REMOVING AND INSTALLING .
Left Side Instrument Panel Vent
- Removing and installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, SIDE INSTRUMENT PANEL VENT .
Bolt
- 3 Nm
- Quantity: 2
Bolt
- 3 Nm
- Quantity: 2
Nut
- 0.5 Nm
- Quantity: 6
  NOTE:
  Tighten The Nuts Carefully To Prevent The Mounting Pins On The Speaker Trim From Shearing Off.
Mount
- For speaker
- Removing and installing. Refer to SPEAKER MOUNT, REMOVING AND INSTALLING .
Mid-Range Speaker
- Equipment levels
- Removing and installing. Refer to LEFT/RIGHT FRONT TREBLE SPEAKER -R20- / -R22-, REMOVING AND INSTALLING .
Side Speaker Trim
- Equipment levels
- Removing and installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING, SIDE SPEAKER TRIM .
Nut
- 0.5 Nm
- Quantity: 6
  NOTE:
  Tighten The Nuts Carefully To Prevent The Mounting Pins On The Defroster Vent From Shearing Off.
Sunlight Photo Sensor -G107-
- Removing and installing. Refer to Sunlight Photo Sensor -G107-, REMOVING AND INSTALLING .
Center Speaker Trim
- Equipment levels
- Removing and installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING, CENTER SPEAKER .
Upper Center Defroster Vent
- Removing and installing. Refer to FRONT CENTER DEFROSTER VENT, REMOVING AND INSTALLING .
Mid-Range Speaker
- Equipment levels
- Removing and installing. Refer to LEFT/RIGHT FRONT BASS SPEAKER -R21- / -R23-, REMOVING AND INSTALLING .
Upper Side Defroster Vent
Bolt
- 3 Nm
- Quantity: 2
Instrument Panel
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Follow the allocation of the airbag to the instrument panel.
- Removing and installing. Refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .
Right Side Instrument Panel Vent
- Removing and installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, SIDE INSTRUMENT PANEL VENT .
Front Passenger Airbag
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Follow the allocation of the airbag to the instrument panel.
- Overview. Refer to OVERVIEW - FRONT PASSENGER AIRBAG .
- Locking and activating possible with key switch
Nut
- Tightening Specification. Refer to OVERVIEW - FRONT PASSENGER AIRBAG .
Bolt
- 3 Nm
MMI Screen
- Removing and Installing. Refer to INFOTAINMENT SYSTEM .
Cover
- For MMI screen
- Removing and installing. Refer to MMI SCREEN COVER, REMOVING AND INSTALLING .
Center Instrument Panel Vent
- Removing and installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, CENTER INSTRUMENT PANEL VENT .
Radio/Navigation System
- Equipment levels
- Removing and installing. Refer to RADIO, REMOVING AND INSTALLING .
- Installation Frame, Removing and Installing. Refer to RADIO/NAVIGATION SYSTEM FRAME, REMOVING AND INSTALLING
Front Information Display Control Head Module -J523-
- Removing and installing. Refer to INFOTAINMENT SYSTEM DISPLAY, REMOVING AND INSTALLING
Bolt
- Tightening Specification. Refer to INFOTAINMENT SYSTEM DISPLAY, REMOVING AND INSTALLING
Climatronic Control Module -J255-
- Removing and installing. Refer to DISPLAY AND CONTROL HEAD, REMOVING AND INSTALLING .
Bolt
- Tightening Specification. Refer to INSTRUMENT CLUSTER .
Bolt
- 3 Nm
Trim
- For Access/Start Authorization Switch -E415-
- Removing and installing. Refer to ACCESS/START AUTHORIZATION SWITCH TRIM, REMOVING AND INSTALLING .
Access/Start Authorization Switch -E415-
- Removing and Installing. Refer to ACCESS/START AUTHORIZATION SWITCH -E415-, REMOVING AND INSTALLING .
Instrument Cluster
- Removing and installing. Refer to INSTRUMENT CLUSTER .
Light Switch Trim
- Removing and installing. Refer to LIGHT SWITCH TRIM, REMOVING AND INSTALLING .