Instrument Panel Vent, Removing And Installing, Center Instrument Panel Vent: Removing

WARNING: This page is about a different variant/trim than selected.

NOTE:

The Instrument Panel Vent Has A Hole On Both Sides For Attaching The T-Handle Hook :3438 .

-- Remove the MMI screen cover. Refer to MMI SCREEN COVER, REMOVING AND INSTALLING .

-- Alternating on both sides, carefully remove the instrument panel vent -1- from the installation opening using the T-Handle Hook:3438 .

Fig 1: Instrument Panel Vent Has A Hole On Both Sides For Attaching Hook 3438

Courtesy of AUDI OF AMERICA, LLC

-- Vehicles with illumination: Disconnect the connector on the instrument panel vent.