Ribbed Belt Pulley With Freewheel, Checking: Procedure
WARNING: This page is about a different variant/trim than selected.
- The Ribbed Belt Pulley With Freewheel Is Removed. Refer To RIBBED BELT PULLEY WITH FREEWHEEL, REMOVING AND INSTALLING .
-- Hold The Inner Ring -2- On The Ribbed Belt Pulley With One Hand Using The Thumb And Index Finger And The Outer Ring -1- With The Other Hand Using The Thumb And Index Finger.
-- Hold The Inner Ring Tight And Turn The Outer Ring In The Rotation Direction Of The Generator.
- If The Free-Running Hub Is Intact, The Outer Does Not Turn.
-- Hold The Inner Ring Tight And Turn The Outer Ring Opposite The Rotation Direction Of The Generator.
- If The Free-Running Hub In Intact, The Outer Ring Turns With Slight Resistance.
Replace The Ribbed Belt Pulley If The Free-Running Hub Does Not Function As Described.