Overview - HITACHI Generator
WARNING: This page is about a different variant/trim than selected.
- Generator
- Screw
- 2 Nm
- Quantity: 4
- Voltage Regulator
- Removing And Installing. Refer To VOLTAGE REGULATOR, REMOVING AND INSTALLING - HITACHI GENERATOR .
- Carbon Brushes, Checking. Refer To CARBON BRUSHES, CHECKING, HITACHI GENERATOR
- Nut
- 4 Nm
- Quantity: 2
- Cover
- Screw
- 4 Nm
- Quantity: 6
- Protective Cap
- Nut
- 11 Nm