Battery Post/Terminal

WARNING: This page is about a different variant/trim than selected.

CAUTION:

In Order To Prevent Damage To The Battery Terminals And Battery Posts, Observe The Following:

Never Use Force To Attach The Battery Terminals By Hand.
Do Not Apply Grease To Battery Posts.
The Battery Terminal Clamps Should Be Mounted So That The Battery Terminal Sits Flush With The Clamp Or Protrudes Out Of It.
After Tightening The Battery Terminal Clamps To The Specified Torque, The Threaded Connections Must Not Be Tightened Again.

Terminal Clamp Tightening Specification. Refer To BATTERY, REMOVING AND INSTALLING .