Battery Load Test Results

WARNING: This page is about a different variant/trim than selected.

By Placing The Battery Under A Strong Load During The Battery -A- Load Test, The Battery Voltage Will Be Reduced.

If The Battery -A- Is Good, The Voltage Drops Only To The Specified Minimum Voltage.
If The Battery -A- Is Defective Or Weakly Charged, The Battery Voltage Will Drop Very Quickly To Below The Specified Minimum Voltage.
After Testing, This Low Voltage Level Is Maintained For A Lengthy Period And Only Increases Again Slowly.
Only Perform The Test Once. Repeating The Test Will Not Produce Accurate Results.
In Order To Be Able To Test Another/Additional Battery -A-, The :VAS5097A Must Cool Down For Approximately 30 Minutes For The Test Result To Be correct.