Flange Shaft Ring

Special tools and workshop equipment required 

• Thrust Plate VW 401
• Thrust Plate VW 402
• Punch VW 407
• Sleeve 32 - 119
• Thrust Pad 3062
• -3- Separating Device 22 to 115 mm, for example Kukko 17/2

Fig 1: Pressing Off Dust Cap From Flange Shaft

Courtesy of AUDI OF AMERICA, LLC

A - Separating tool 22 to 115 mm, for example Kukko 17/2

Fig 2: Installing Ring -A- On Flange Shaft

Courtesy of AUDI OF AMERICA, LLC

• Installed position of the ring -A- : the indentation in the ring faces the 32 - 119.