Flange/Driveshaft Seal

Special tools and workshop equipment required 

• Thrust Plate VW 402
• Punch VW 407
• Thrust Disc VW 412
• Sleeve 40 - 20
• -3- Separating Device 22 to 75 mm, for example Kukko 17/1

Fig 1: Pressing Dust Cap Off Of Driveshaft Flange

Courtesy of AUDI OF AMERICA, LLC

A - Separating tool 22 to 115 mm, for example Kukko 17/2

Fig 2: Pressing Dust Cap Onto Driveshaft Flange

Courtesy of AUDI OF AMERICA, LLC

• Installed position of the ring -A- : the indentation in the ring faces the 40 - 20.