Battery, Disconnecting And Connecting: Notes
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Risk Of Accident.
- When Working On Pyrotechnic Components (Such As Airbags And Belt Tensioners), The Battery Must Be Disconnected With The Ignition Switched On, Contrary To The Following Description.
TDI (SCR) Vehicles
- After The Ignition Is Switched Off, The Reducing Agent Goes From The Metering Line To The Reducing Agent Injector -N474- And Back Into The Reducing Agent Active Chamber.
- Wait Until All The Reducing Agent Has Been Returned Before Working In This Area. This Could Take Up To 10 Minutes After Switching Off The Ignition.
- Only After This Is Complete Can The Battery Be Disconnected. Again, This Could Take Up To 10 Minutes After Switching Off The Ignition.