Airbag Fasteners, Checking After A Collision

All Damaged Securing Pieces Must Be Replaced, You Cannot Reshape Components Or >>Make Them Fit<<.

The Following Components Must Be Checked After Every Airbag Deployment.

With A Passenger Airbag Deployment: 

• Instrument Panel Central Tube, Passenger Airbag Supports And Passenger Airbag Must Be Installed Free Of Tension. Replace Central Tube.
• Check The Glove Compartment For Damage. Replace The Glove Compartment If Damaged.

With A Driver Airbag Deployment: 

• Steering Wheel: Remove The Steering Wheel And Place It With The Rim On A Flat Surface. The Entire Steering Wheel Rim Must Rest On The Surface. Otherwise, Steering Wheel Should Be Replaced.
• Check Steering Wheel For Smoke Residue. If Smoke Residue Is Present, Replace Steering Wheel.