LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (Passenger Protection, Airbags, Seat Belts (Coupe)) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belts >> Front Belt End Fitting, Removing And Installing >> Installing

Front Belt End Fitting, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install in reverse order of removal. Note the following: 

-- If parts of the seat belt system are removed due to an accident, replace the belt system mounting bolts.

-- Slide the front belt anchor -3- with the socket -4- and lock washer -5- onto the bolt -2- and tighten.

-- Check if the bolt is self-locking, then replace.

scientia non olet · About LEMON Manuals