Brake System Vacuum Pump -V192-, RS 5: Notes
WARNING: This page is about a different variant/trim than selected.
NOTE:
It is necessary to remove the left front wheel housing liner in order to remove the brake system vacuum pump -V192-, refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
The construction of brake system vacuum pump -- depends on the engine.
The brake system vacuum pump -- is switched on by the engine control module depending on the intake line pressure.
Brake system vacuum pump -- is not intended to be serviced. In case of complains, determine cause with help of function or seal test. If there is a malfunction, replace electrical vacuum pump.